How ToOrbi Router SetupOrbi Setup

How To Setup Your Orbi WiFi System To Perform With Fios?

Orbi Wi-Fi is an ideal choice to fulfill the internet requirement of your entire family. In case you want to set up your Orbi WiFi System for working with Fios, you can follow the post below.

The Orbi mesh-router system from Netgear is of top-notch quality. And it’s capable of filling a large home with high-speed Wi-Fi.

Who doesn’t want top-class internet connectivity?

And no one wants to experience a halt in the middle of an online session of tutorials etc.

The incredible Orbi router features more power and range as compared to its competitors. That’s why it has become a top-class choice for many consumers around the world.

To know about the features of the Orbi router, you can contact the netgear orbi support team.

The dedicated channel of Orbi is meant for router-to-extension data traffic. And it helps the overall system to extract the optimum throughput for fulfilling the online requirements of your entire household.

How to turn off the Wireless Network of Verizon Fios?  

First, you’ve to go to your web browser from your mobile device or computer. However, your device needs to be connected to the respective Verizon Fios router.

Now, you need to enter the IP address 192.168.1.1.

You would see a login window.

Now, you’ve to enter the correct username and password. The Main page would display.

A worth noting point is that in case you haven’t logged in to the respective Fios router before, you need to create a new username and password. And it would be prompted.

Next, on the Main page, you’ve to click ‘Wireless Settings > Basic Security Settings’.

Next, under ‘Turn Wireless ON’, you need to select ‘Off’. And at the bottom part of the page, click ‘Apply’.

How to set up Your Orbi Router in AP Mode?

You’ve to execute the following steps to set up the Orbi router in AP mode:

You need to make use of an Ethernet cable for connecting the Internet port of the respective Orbi router to the LAN port on the particular Verizon Fios router.

Now, you’ve to launch a web browser from your mobile device or computer. And it has to be connected to your Orbi network.

Next, you need to visit orbilogin.com. It’s time to enter the username and password of your Orbi router.

Do remember, the username is ‘admin’ and the default password is ‘password’. The username, as well as password, are case-sensitive.

After that, the BASIC Homepage would appear.

Next, you’ve to select ‘ADVANCED > Advanced Setup > Router/AP Mode’. And the Router/AP Mode page would display.

Next, you need to select the check box for ‘AP Mode’.

It’s time to select the radio button for the intended IP address setting.

Get Dynamic IP Address from the Existing Router: The Verizon Fios router that is present on the network would assign an IP address to the Orbi router when your Orbi router is present in its AP mode. You can take orbi support to know more about this step.

Enable Fixed Internet Protocol Settings on this particular device (it’s not recommended): You can use these settings in case you prefer to assign a particular IP address to the respective Orbi router manually when it’s in its AP mode.

In order to avoid the situation of interference with other gateways or routers in a particular network, you should use different Wi-Fi settings on every router. You should also turn off the Wi-Fi radio on the Verizon Fios router. And you should use the Orbi router for Wi-Fi client access only.

Now, click the ‘Apply’ button. As a result, the IP address of the respective router would change. And you will be disconnected.

In order to reconnect, you’ve to close and then restart your browser. Now enter orbilogin.com.

To know more about the above process, you can contact the orbi tech support.

Leave a Reply

Your email address will not be published. Required fields are marked *