How ToNetgear Orbi SetupOrbi Satellite Setup

How To Set Up Ethernet Backhaul On The Orbi Wi-Fi System?

The Netgear Orbi is a brilliantly-designed mesh-router system that is able to fulfill the internet requirement of a house with its high-speed Wi-Fi. If you have purchased an Orbi WiFi System and now want to set up Ethernet backhaul on it, then follow the entire post.

The Orbi WiFi System is a top-class device in the domain of routers and you can take help of the netgear orbi support to know more about it.

First, I’ll discuss some of the features of this incredible router and then proceed to the Ethernet backhaul setup procedure.

The incredible Netgear Orbi host, as well as extensions, are big towers with the measurement of 8.9 inches x 6.7 inches x 3.1 inches.

And you can easily use one of them in a bookshelf and another as a bookend, however, each of the Orbi units is extremely large that means you can’t easily hide them.

Just like Google Wifi, the incredible Orbi units are equipped with color-coded LEDs.

Whenever an Orbi device starts glowing white throughout the oval on top that means it has started up.

And its blue indication means everything is going on perfectly.

This particular Orbi device is capable of transmitting Wi-Fi data on total three radio-frequency bands.

And the primary 2.4-GHz, as well as 5-GHz, radios provide the facility of a theoretical peak around of the data flow of 1.2Gbps to the user devices.

You will also get a surprise because Netgear has added a second 5-GHz, 1.7Gbps radio that has been dedicated exclusively to the backhaul. Due to the side channel, the key link between the Orbi units and the respective devices remain as fast and strong.

For providing support to this particular configuration, each of the Orbi devices has high-performance brilliant and amplified antennas throughout the perimeter. It is also equipped with an antenna and a Bluetooth, however, they are dormant as of now.

The Orbi router is also able to handle up to three satellites but each of the satellite can directly communicate with the particular host router in a respective a hub-and-spoke arrangement.

A true mesh topology arrangement would not be used in this regard. You can contact orbi tech support if you have any question regarding Orbi products.

The Orbi’s router unit and the satellite units share the same appearance but they are not interchangeable. That means you can’t decide randomly which unit should act as a router and which ought to be the repeater.

The backside of each of the Orbi devices hosts a power input, four gigabit Ethernet ports, and an on/off button.

On this particular router, one port is yellow and it is able to connect to the broadband modem.

You can also use the other LAN ports for connecting to stationary PCs, printers, and network-attached storage drives.

The Orbi satellite is able to connect to an Orbi router or another Orbi satellite automatically and wirelessly in order to create a wireless backhaul.

Alternatively, you can utilize an Ethernet cable for connecting the respective satellite to the router or to another satellite if you want to create a wired backhaul connection.

A worth noting point is that prior to set up a connection of an Ethernet backhaul, do ensure that you have updated the firmware on your every Orbi devices.

First, you need to connect the Orbi satellites to the Orbi router by using star topology for creating an Ethernet backhaul connection.

After that, connect the Orbi satellites to the Orbi router by using a daisy chain topology for creating an Ethernet backhaul connection.

In this step, you ought to make a connection of the Orbi satellites and the Orbi router to an Ethernet switch.

To know about the above procedure, you can contact netgear orbi help.

Another noteworthy point is that the Ethernet ports on the Orbi satellites as well as the Orbi router have been rated as 1 Gbps. You need to ensure that the particular switch ports are 1 Gbps or faster.

 

Leave a Reply

Your email address will not be published. Required fields are marked *