Orbi WiFi Systems have been designed for a wide range of home environments. It can be apartments, small homes, or flourishing estates. If you are interested to set up my Orbi WiFi System to work with Fios, then follow the post below.
The Netgear Orbi mesh-router system has been designed to provide the facility of high-speed Wi-Fi to a large home. It features incredible power and range, as compared to approximately any other router. The dedicated channel for Orbi for the purpose of router-to-extension data traffic is helpful for the system in squeezing the optimum throughput for fulfilling the online requirements and expectations of your family. You can contact orbi tech support to know more about this particular device.
Setting Up of Orbi WiFi System to perform the work with Fios
Fios is a collected Internet access, television, and telephone service that operates throughout a fiber-optic communications network. If you want the Orbi WiFi System to perform with Fios, then you ought to set up the Orbi router as an access point by executing the steps discussing below: First, you must turn off the Verizon Fios wireless network. Now, set up the respective Orbi router in AP mode. The explanation of the above-mentioned steps is given below:
How to Turn Off the Verizon Fios Wireless Network?
First, you have to start a web browser from a computer or a mobile device that has been connected to the respective Verizon Fios router. Now, enter the IP address 192.168.1.1. A login window will appear. It’s time to enter the username as well as password and then the main page will appear. In case you have not logged in to the Fios router earlier, then you will be asked to create a new username as well as password. Next, on the Main page, you ought to click Wireless Settings > Basic Security Settings. Under the section of Turn Wireless ON, you need to select Off. Now, go to the bottom of the page and click Apply. You can contact the technical support team via netgear orbi support phone number to get clarification of the process.
How to Set Up the Orbi Router in AP Mode?
You can use an Ethernet cable for making a connection to the Internet port of the respective Orbi router to the LAN port on the Verizon Fios router. Now, it’s time to start a web browser from a mobile device or computer that has been connected to the Orbi network. Next, you ought to enter orbilogin.com. Now, enter the username as well as the password of the Orbi router. You need to fill the username as admin and its default password is password. Do remember that the username, as well as the password, is case-sensitive. After that, the BASIC Home page will appear. Now, choose ADVANCED > Advanced Setup > Router/AP Mode. Next, Router or AP Mode page will display. Next, choose the AP Mode check box. It’s time to choose the radio button for the setting of IP address that you like to use: You can obtain it dynamically from the already-present router. The Verizon Fios router will be going to assign an IP address to the particular Orbi router while it’s in AP mode. You ought to enable fixed IP settings on the particular device, as per the recommendation. You should make use of this particular setting in case you want to assign a particular IP address manually to the respective Orbi router in its AP mode. In order to avoid interference with other gateways or routers in the network, you should make use of separate WiFi settings on each router (according to recommendation). You ought to turn off the WiFi radio on the Verizon Fios router and make use of the Orbi router for accessing the WiFi client only. Now, click the Apply button. The IP address of the respective Orbi router will be changed and you will be disconnected. In order to reconnect, close as well as restart the browser, you ought to visit orbilogin.com. In case you experience difficulties in executing to perform the aforementioned steps, you can contact the customer care support by dialing orbi tech support phone number.