If you have already purchased the Orbi Router and Satellite and now want to set them up, then you should follow the post below
In order to set up the Orbi router and satellite, you ought to follow the below steps.
First, you have to unplug the respective modem and then removal and replacement of the backup battery should be performed in case it is used.
Next, you need to plug in the modem back.
And then you have to make a connection of your modem to the respective yellow Internet port on the particular Orbi router through the utilization of the attached Ethernet cable.
In this step, you have to connect the respective Orbi router to a source of power. In case the Power LED, present on the backside of the Orbi router doesn’t light, you have to press the Power ON/OFF button.
Next, you ought to wait for the ring LED of the respective Orbi router to light solid white. After that, it would light pulse white.
The placement of the Orbi satellite should be in the middle of the respective house in order to have the optimum Wi-Fi coverage.
In this step, the Orbi satellite must be connected to a power source. Another noteworthy point is that in case the Power LED on the back part of the particular satellite doesn’t light, you have to press the Power ON/OFF button. You can connect the orbi support team t resolve any query about Orbi devices.
It’s time for waiting for the ring LED of this specific satellite to light solid white. After that, it is going to light pulse white and at last pulse magenta.
Here worth noting point is that the ring LED of the Orbi satellite might turn into pulse magenta for up to the duration of one minute while the respective satellite tries to synchronize with the Orbi router.
After the ring LED of the particular satellite pulses magenta, it would start lighting one of the following colors for the duration of 10 seconds. And then it would turn off.
Solid Blue: This color indicates that the connection between the Orbi satellite and Orbi router is decent.
Solid Magenta: The particular Orbi satellite can’t be connected to the Orbi router. You have to move the respective satellite in the nearby location of the Orbi router.
Solid Amber: This particular color indicates that the connection between the Orbi satellite and the Orbi router is fair. The Orbi satellite should be moved to the nearby location of the Orbi router.
A noteworthy aspect is that in case the ring LED of the particular satellite is still pulsing the magenta color following the duration of around one minute and if you have already moved this satellite in a nearby place to the respective satellite, then it’s time to pressing the ‘Sync’ button on the particular router and also on the particular satellite.
The orbi tech support will help you if you experience any difficulty in performing these steps.
In case the Orbi satellite has been successfully synchronized with the Orbi router, then the ring LED of the particular satellite would pulse white. After that, it would light solid blue in order to indicate a decent connection. And then it would turn off.
Now, you have to connect the respective mobile device or computer to the brilliantly-built Orbi router or satellite with a Wi-Fi or Ethernet connection.
Another worth-considering point is that to make a connection with Wi-Fi, you need to find out the preset Wi-Fi name or SSID and password on the Orbi router or satellite’s label. And then the connection to that particular network should be made from the Wi-Fi-enabled mobile device or computer.
You should visit the website http://orbilogin.com and then execute the prompted on-screen instructions in order to set up the Orbi network.
The ring LED of the Orbi router would turn off when the setup procedure would be completed successfully.
To clarify any doubt regarding the above step(s), you can contact through the netgear orbi support phone number.
By performing the aforementioned steps correctly, you can effortlessly set up the Orbi Router and Satellite.